Photo doors paint choice - radiant - Small foreigners

 Paint as the suite door, wooden door factory post-processing technology, its advantages and disadvantages of the use of a direct impact on the final results. At the same time the cost is the paint on the doors of the largest part of the cost. Paint divided into the types of phenolic paint, alcohol acid, paint, polyurethane paint, lacquer, polyester (PE paint) and PU paint. which phenolic and alkyd paint adhesion of the film texture and poor out of basic in decoration, extensive use of the nitrate based paint, polyester and PU paint. nitrocellulose as the construction is relatively simple, suitable for manual operation, hand-decorated by the majority do want to use wood, then the thin film, feel good, are not effective. PU coating advantages is easy to polish, the process saves time and effort, the disadvantage is the film soft, slight dent in the white bump apt. If there is at least in the paint layer is PE coating, it will greatly reduce this possibility. PE Paint (poly varnish) is that the film hard, hiding power, transparency, better performance of veneer texture, the disadvantage is difficult to grinding, time-consuming process, most manufacturers do not want to use PE coating. currently on the market 90 % of wooden doorsets with polyester paint, PU paint with a small number of manufacturers. In general, polyester and PU paint color to go through to find the three sides so the end of six processes, some brands and increase the curing process of wax applied. Therefore, the choice of doors, the paint is one of the factors must be considered, which directly affects the texture, feel, moisture, environmental protection, durable, resistant to yellowing and other issues. <><>( the original quote: